Planet (GS-4210-24PL4C) Managed POE Switch - 802.3at/bt High Power 15W/30W/60W/95W

Description GS-4210-24PL4C Key Features : 28-Port 10/100/1000BASE-T Gigabit RJ45 copper with 24-Port IEEE 802.3at/af PoE Injector (Port-1 to Port-24) 4 100/1000BASE-X SFP slots, shared with port-25 to port-28 compatible with 100BASE-FX SFP RJ45 console interface for switch basic management and setup Reset button for system factory default and reboot   GS-4210-24PL4C Switching Hardware-based 10/100Mbps, half/full duplex and 1000Mbps full duplex mode, flow control and auto-negotiation, and auto MDI/MDI-X Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation 10K jumbo frame Supports ESD protection Contact Discharge 4KV DC Air Discharge 8KV DC Automatic address learning and address aging Supports CSMA/CD protocol   Power over Ethernet Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE Backward compatible with IEEE 802.3af Power over Ethernet Up to 24 ports of IEEE 802.3af/802.3at devices powered Supports PoE power up to 30 watts for each PoE port 280-watt PoE budget for GS-4210-24P4C 430-watt PoE budget for GS-4210-24PL4C Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100 meters in standard mode and 250m in extend mode PoE management Total PoE power budget control Per port PoE function enable/disable PoE Port Power feeding priority Per PoE port power limitation PoE delay PD classification detection Intelligent PoE features PD alive check PoE schedule PoE extension Layer 2 Features Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth Supports VLAN IEEE 802.1Q tagged VLAN Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) Protocol VLAN Voice VLAN Private VLAN Management VLAN GVRP Supports Spanning Tree Protocol STP (Spanning Tree Protocol) RSTP (Rapid Spanning Tree Protocol) MSTP (Multiple Spanning Tree Protocol) STP BPDU Guard, BPDU Filtering and BPDU Forwarding Supports Link Aggregation IEEE 802.3ad Link Aggregation Control Protocol (LACP) Cisco ether-channel (Static Trunk) Provides port mirror (many-to-1) Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching)   Quality of Service Ingress/Egress Rate Limit per port bandwidth control Storm Control support Broadcast/Unknown-Unicast/Unknown-Multicast Traffic classification IEEE 802.1p CoS TOS/DSCP/IP Precedence of IPv4/IPv6 packets Strict priority and Weighted Round Robin (WRR) CoS policies   Multicast Supports IPv4 IGMP snooping v2 and v3 Supports IPv6 MLD snooping v1, v2 IGMP querier mode support IGMP snooping port filtering MLD snooping port filtering   Security Authentication IEEE 802.1X Port-based network access authentication Built-in RADIUS client to cooperate with the RADIUS servers DHCP Option 82 RADIUS/TACACS login user access authentication Access Control List IPv4/IPv6 IP-based ACL IPv4/IPv6 IP-based ACE MAC-based ACL MAC-based ACE MAC Security Static MAC MAC Filtering Port Security for Source MAC address entries filtering DHCP Snooping to filter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks DoS Attack Prevention   Management IPv4 and IPv6 dual stack management Switch Management Interface Web switch management Console/Telnet Command Line Interface SNMP v1 and v2c switch management SSHv2, TLSv1.2 and SNMP v3 secure access SNMP Management Four RMON groups (history, statistics, alarms, and events) SNMP trap for interface Link Up and Link Down notification User Privilege Levels Control Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance Firmware upload/download via HTTP/TFTP Configuration upload / download through Web interface Dual Images Hardware reset button for system reboot or reset to factory default SNTP Network Time Protocol Network Diagnostic ICMPv6/ICMPv4 Remote Ping Cable Diagnostics SFP-DDM (Digital Diagnostic Monitor) Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED Event message logging to remote Syslog server PLANET Smart Discovery Utility for deployment management PLANET NMS system and CloudViewer for deployment management GS-4210-24PL4C Applications : High Scalability and Best Security for Today’s IP Networking and Cyber Security Solution The GS-4210 PoE series comes with non-blocking design and SFP fiber-optic modules, bringing network infrastructure higher flexibility but lower in cost. Providing twenty-four 10/100/1000BASE-T PoE ports and four Gigabit TP/SFP combo ports, the GS-4210-24P4C and GS-4210-24PL4C can easily build a networking security on the cyber security system for the enterprises. For instance, it can work with the router and UTM to perform comprehensive security for today’s businesses.     ITU-T G.8032 ERPS with PoE IP Surveillance System for SMBs/Workgroups The GS-4210 PoE series features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology into customer’s automation network to enhance system reliability and uptime. Applying the IEEE 802.3at Power over Ethernet standard, the GS-4210 PoE series can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras and speed dome cameras. The GS-4210 PoE series can easily build a power that can centrally control a wireless AP/IP camera/VoIP system for SMBs and workgroups in the enterprises with high availability network infrastructure.   Show More Show Less