Description IGS-5225-8P4S-12V Key Features : Physical Port 8 10/100/1000BASE-T Gigabit Ethernet RJ45 port switch IEEE 802.3at PoE Injector 2 100/1000BASE-X SFP ports for SFP type auto detection 2 100/1000/2500BASE-X SFP ports for SFP type auto detection One RJ45 console interface for basic management and setup Power over Ethernet Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE Up to 8 IEEE 802.3af/802.3at devices powered Supports PoE power up to 36 watts for each PoE port Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100m PoE management features PoE admin-mode control PoE management mode selection PoE legacy mode selection PoE budget setup option Per port PoE function enable/disable PoE port power feeding priority Per PoE port power limit PoE port status monitoring PD classification detection Sequence port PoE PoE extend mode control to support power feeding up to a distance of up to 160 meters Intelligent PoE features Temperature threshold control PoE usage threshold control PoE schedule PD alive check LLDP PoE Neighbors Industrial Protocol Mod bus TCP for real-time monitoring in the SCADA system IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode Industrial Case and Installation IP30 aluminum case DIN-rail or wall-mount design 12~54V DC, redundant power with reverse polarity protection Supports 6KV DC Ethernet ESD protection -40 to 75 degrees C operating temperature Digital Input and Digital Output 2 digital input (DI) 2 digital output (DO) Integrate sensors into auto alarm system Transfer alarm to IP network via email and SNMP trap Layer 3 IP Routing Features Supports maximum 32 static routes and route summarization Routing interface provides per VLAN routing mode Layer 2 Features Storm Control support Broadcast / Multicast / Unicast Supports VLAN IEEE 802.1Q tagged VLAN Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad) Private VLAN Edge (PVE) Port Isolation MAC-based VLAN IP Subnet-based VLAN Protocol-based VLAN VLAN Translation Voice VLAN GVRP Supports Spanning Tree Protocol IEEE 802.1D Spanning Tree Protocol (STP) IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), spanning tree by VLAN BPDU Filtering/BPDU Guard Supports Link Aggregation 802.3ad Link Aggregation Control Protocol (LACP) Cisco ether-channel (static trunk) Maximum 6trunk groups with 4 ports per trunk group Up to 8Gbps bandwidth (duplex mode) Provide sport mirror (many-to-1) Port mirroring to monitor the incoming or outgoing traffic on a particular port Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching) Compatible with Cisco Uni-directional link detection(UDLD) that monitors a link between two switches and blocks the ports on both ends of the link if the link fails at any point between the two devices Link Layer Discovery Protocol (LLDP) IEEE 802.3ah OAM Quality of Service Ingress Shaper and Egress Rate Limit per port bandwidth control 8 priority queues on all switch ports Traffic classification IEEE 802.1p CoS IP TOS/DSCP/IP precedence IP TCP/UDP port number Typical network application Strict priority and Weighted Round Robin (WRR) CoS policies Supports QoS and In/Out bandwidth control on each port Traffic-policing on the switch port DSCP remarking Multicast SupportsIPv4 IGMP snooping v1, v2 and v3 Supports IPv6 MLD snooping v1 and v2 Querier mode support IPv4 IGMP snooping port filtering IPv6 MLD snooping port filtering MVR (Multicast VLAN Registration) Security Authentication IEEE 802.1x port-based/MAC-based network access authentication Built-in RADIUS client to co-operate with the RADIUS servers TACACS login users access authentication RADIUS / TACACS users access authentication Guest VLAN assigns clients to a restricted VLAN with limited services Access Control List IP-based Access Control List (ACL) MAC-based Access Control List Source MAC/IP address binding DHCP Snooping to filter un-trusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spoofing attacks IP address access management to prevent unauthorized intruder Management IPv4 and IPv6 dual stack management Switch Management Interfaces Web switch management Console and Telnet Command Line Interface SNMP v1 and v2c switch management SSHv2, TLSv1.2 and SNMPv3 secure access SNMP Management Four RMON groups (history, statistics, alarms, and events) SNMP trap for interface Link Up and Link Down notification IPv6 IP Address/NTP/DNS management Built-in Trivial File Transfer Protocol (TFTP) client BOOTP and DHCP for IP address assignment System Maintenance Firmware upload/download via HTTP Reset button for system reboot or reset to factory default Dual Images DHCP Relay and DHCP Option82 DHCP Server User Privilege levels control NTP (Network Time Protocol) UPnP Network Diagnostic ICMPv6/ICMPv4 Remote Ping Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues SFP-DDM (Digital Diagnostic Monitor) SMTP, Syslog and SNMP trap remote alarm Local system Log PLANET NMS System and Smart Discovery Utility for deployment management Provides ONVIF for co-operating with PLANET video IP surveillances IGS-5225-8P4S-12V Applications : Industrial Area Department/Workgroup PoE Switch Providing up to 8 PoE , in-line power interfaces, the IGS-5225-8P4S-12V can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the IGS-5225-8P4S-12V makes the installation of IP cameras or wireless AP easier and more efficient. Perfect Integration Solution for IP PoE Camera and NVR System The IGS-5225-8P4S-12V provides eight 10/100/1000BASE-T 802.3at PoE ports which can offer sufficient PoE power to 8 PoE IP cameras at the same time. In addition, with the two 100/1G BASE-X SFP and two 100/1000/2500BASE-X SFP interfaces, the IGS-5225-8P4S-12V can connect to a core fiber switch and send video streams to an NVR and monitoring center. Through the high-performance switch architecture, the IGS-5225-8P4S-12V facilitates the recorded video files from the 8 PoE IP cameras to be saved in the NVR systems. Furthermore, the NVR systems can be controlled and monitored in both the local LAN and the remote site via Internet. The IGS-5225-8P4S-12V undoubtedly brings an ideal secure surveillance system at a lower total cost. Show More Show Less
