Description IGS-20160HPT Hardware Specifications Version 4 Copper Ports 18 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports SFP/mini-GBIC Slots 2 1000/2500BASE-X SFP interfaces (Port-19 and Port-20) Compatible with 100BASE-FX SFP PoE Injector Port 16 ports with 802.3at/af PoE injector function with Port-1 to Port-16 Console 1 x RJ45-to-RS232 serial port (115200, 8, N, 1) Reset Button < 5 sec: System reboot > 5 sec: Factory default ESD Protection 6KV DC Enclosure IP30 aluminum case Installation DIN-rail kit and wall-mount kit Connector Removable 6-pin terminal block for power input Pin 1/2 for Power 1, Pin 3/4 for fault alarm, Pin 5/6 for Power 2 Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GND Alarm One relay output for power failure. Alarm relay current carry ability: 1A @ 24V DC DI, DO 2 digital input (DI) Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input load to 24V DC, 10mA max. 2 digital output (DO) Open collector to 24V DC, 100mA max. Dimensions (W x D x H) 86.8 x 107.3 x 152 mm Weight 1548g Power Requirements Dual 48~54V DC (>51V DC for PoE output recommended) Power Consumption Max.18.8 watts/64BTU (Power on without any connection) Max. 413 watts/1409BTU (Full loading with PoE function) LED Indicator System: Power 1 (Green) Power 2 (Green) Fault Alarm (Red) Ring (Green) Ring Owner (Green) DIDO (Red) Per 10/100/1000T RJ45 PoE Ports: PoE-in-Use (Amber) LNK/ACT (Green) Per 10/100/1000T RJ45Ports: 1000 LNK/ACT (Green) 100 LNK/ACT (Amber) Per SFP Interface: 10/100 LNK/ACT (Amber) 1G/2.5G LNK/ACT (Green) Switching Switch Architecture Store-and-Forward Switch Fabric 46Gbps/non-blocking Throughput (packet per second) 34.2Mpps@ 64 bytes packet Address Table 32K entries, automatic source address learning and aging Shared Data Buffer 32Mbits Flow Control IEEE 802.3x pause frame for full duplex Back pressure for half duplex Jumbo Frame 10K bytes Power Over Ethernet PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE PoE Power Supply Type End-span PoE Power Output IEEE 802.3af Standard Per port 48V~51V DC (depending on the power supply), max. 15.4 watts IEEE 802.3at Standard Per port 51V~54V DC (depending on the power supply), max. 36 watts Power Pin Assignment 1/2( ), 3/6(-) PoE Power Budget 48V Power input 240W maximum (depending on power input) 52~54V Power input Single power input: 240W maximum (depending on power input) Dual power input: 360W maximum (depending on power input) ※Dual power input must be the same as DC voltage, like dual 54V Max. Number of Class 2 PDs 16 Max. Number of Class 3 PDs 16 Max. Number of Class 4 PDs 10 Layer 3 Functions IP Interfaces Max. 128 VLAN interfaces Routing Table Max. 128 routing entries Max. 4K H/W routing table entries Routing Protocols IPv4 RIPv1/v2 IPv4 OSPFv2 IPv4 hardware static routing IPv6 OSPFv3 hardware static routingIPv4 OSPFv2 dynamic routing Layer 2 Function Port Configuration Port disable/enable Auto-negotiation 10/100/1000Mbps full and half duplex mode selection Flow control disable/enable Power saving mode control Port Status Display each port’s speed duplex mode, link status, flow control status, auto negotiation status, trunk status Port Mirroring TX / RX / Both Many-to-1 monitor RMirror – Remote Switched Port Analyzer (Cisco RSPAN) Supports up to 5 sessions VLAN IEEE 802.1Q tag-based VLAN IEEE Q-in-Q tunneling Private VLAN Edge (PVE) MAC-based VLAN Protocol-based VLAN VLAN Translation Voice VLAN MVR (Multicast VLAN Registration) GVRP Up to 4K VLAN groups, out of 4094 VLAN IDs Link Aggregation IEEE 802.3ad LACP/static trunk Supports 10 trunk groups with 16 ports per trunk group Spanning Tree Protocol IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol Supports 7 MSTP instances BPDU Guard, BPDU filtering and BPDU transparent Root Guard IGMP Snooping IPv4 IGMP (v1/v2/v3) snooping IPv4 IGMP querier mode support Up to 255 multicast groups MLD Snooping IPv6 MLD (v1/v2) snooping IPv6 MLD querier mode support Up to 255 multicast groups Bandwidth Control Per port bandwidth control Ingress: 500Kb~1000Mbps Egress: 500Kb~1000Mbps Ring Supports ERPS, and complies with ITU-T G.8032 Recovery time < 10ms @ 3 nodes Recovery time < 50ms @ 16 nodes Supports Major ring and sub-ring Synchronization IEEE 1588v2 PTP (Precision Time Protocol) Peer-to-peer transparent clock End-to-end transparent clock QoS Traffic classification based, strict priority and WRR 8-level priority for switching Port number 802.1p priority 802.1Q VLAN tag DSCP/TOS field in IP packet Security Functions Access Control List IP-based ACL/MAC-based ACL ACL based on: MAC Address IP Address Ethertype Protocol Type VLAN ID DSCP 802.1p Priority Up to 256 entries Security Port Security IP source guard, up to 512 entries Dynamic ARP inspection, up to 1K entries Command line authority control based on user level Static MAC address, up to 64 entries AAA RADIUS client TACACS client Network Access Control IEEE 802.1x port-based network access control MAC-based authentication Local/RADIUS authentication Switch Management Basic Management Interfaces Console; Telnet; Web browser; SNMP v1, v2c Secure Management Interfaces SSHv2, TLS v1.2, SNMP v3 System Management Firmware upgrade by HTTP protocol through Ethernet network Configuration upload/download through HTTP Remote syslog System log LLDP protocol NTP PLANET Smart Discovery Utility PLANET NMS system PLANETCloudViewer/CloudViewerPro Event Management Remote syslog Local system log SMTP ONVIF ONVIF device discovery ONVIF device monitoring Floor Map SNMP MIBs RFC 1213 MIB-II RFC 2863 IF-MIB RFC 1493 Bridge MIB RFC 1643 Ethernet MIB RFC 2863 Interface MIB RFC 2665 Ether-Like MIB RFC 2737 Entity MIB RFC 2819 RMON MIB (Groups 1, 2, 3 and 9) RFC 2618 RADIUS Client MIB RFC 3411 SNMP-Frameworks-MIB RFC 4292 IP Forward MIB RFC 4293 IP MIB RFC 4836 MAU-MIB IEEE 802.1X PAE LLDP Power over Ethernet MIB Standards Conformance Regulatory Compliance FCC Part 15 Class A, CE Stability Testing IEC60068-2-32 (free fall) IEC60068-2-27 (shock) IEC60068-2-6 (vibration) Standards Compliance IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000T IEEE 802.3x flow control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN tagging IEEE 802.1ad Q-in-Q VLAN stacking IEEE 802.1X Port Authentication Network Control IEEE 802.1ab LLDP IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus IEEE 802.3ah OAM IEEE 802.1ag Connectivity Fault Management (CFM) IEEE 1588 PTPv2 RFC 768 UDP RFC 783 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1058 RIP v1 RFC 2453 RIP v2 RFC 1112 IGMP v1 RFC 2236 IGMP v2 RFC 3376 IGMP version 3 RFC 2710 MLD version 1 RFC 3810 MLD version 2 RFC 2328 OSPF v2 RFC 2740 OSPF v3 ITU G.8032 ERPS Ring ITU-T Y.1731 Performance Monitoring Environment Operating Temperature -40 ~ 75 degrees C Storage Temperature -40 ~ 85 degrees C Humidity 5 ~ 95% (non-condensing) Show More Show Less
